CORD-19:e9900f49f3469114a7ad6b81b7692540cdf17817 / 36535-36774 2 Projects
A New Cistron in the Murine Hepatitis Virus Replicase Gene ᰔ
Abstract
We report an RNA-negative, temperature-sensitive (ts) mutant of Murine hepatitis virus, Bristol ts31 (MHV-Brts31), that defines a new complementation group within the MHV replicase gene locus. MHV-Brts31 has near-normal levels of RNA synthesis at the permissive temperature of 33°C but is unable to synthesize viral RNA when the infection is initiated and maintained at the nonpermissive temperature of 39.5°C. Sequence analysis of MHV-Brts31 RNA indicated that a single G-to-A transition at codon 1307 in open reading frame 1a, which results in a replacement of methionine-475 with isoleucine in nonstructural protein 3 (nsp3), was responsible for the ts phenotype. This conclusion was confirmed using a vaccinia virus-based reverse genetics system to produce a recombinant virus, Bristol tsc31 (MHV-Brtsc31), which has the same RNA-negative ts phenotype and complementation profile as those of MHV-Brts31. The analysis of protein synthesis in virusinfected cells showed that, at the nonpermissive temperature, MHV-Brtsc31 was not able to proteolytically process either p150, the precursor polypeptide of the replicase nonstructural proteins nsp4 to nsp10, or the replicase polyprotein pp1ab to produce nsp12. The processing of replicase polyprotein pp1a in the region of nsp1 to nsp3 was not affected. Transmission electron microscopy showed that, compared to revertant virus, the number of double-membrane vesicles in MHV-Brts31-infected cells is reduced at the nonpermissive temperature. These results identify a new cistron in the MHV replicase gene locus and show that nsp3 has an essential role in the assembly of a functional MHV replication-transcription complex.
Coronaviruses are positive-stranded RNA viruses with genomes ranging in size from 27 to 32 kb. Approximately twothirds of the genome encodes proteins that are involved in viral RNA synthesis. The majority of these proteins are encoded in two 5Ј-proximal, overlapping open reading frames (ORFs), ORF1a and ORF1b, and are translated as polyproteins, pp1a and pp1ab, which are then processed by virus-encoded proteinases into 16 nonstructural proteins (nsp's): nsp1 to nsp11, encoded in ORF1a, and nsp12 to nsp16, encoded in ORF1b. The translation products of ORF1a and ORF1ab, together with other viral proteins (41, 60) and, possibly, cellular proteins, assemble into replication-transcription complexes (RTCs) responsible for the synthesis of genome-sized RNA and a set of 3Ј-coterminal subgenome-sized mRNAs. The subgenomesized mRNAs are produced by an unusual mechanism that involves discontinuous transcription during negative-strand RNA synthesis (for recent reviews, see references 39 and 43) .
The coronavirus RTCs accumulate at perinuclear regions and are associated with a network of endoplasmic reticulum-derived, modified membranes (16, 20, 28) . The interconnected structures within this network are known as convoluted membranes (CMs) and double-membrane vesicles (DMVs). Both structures are associated with viral replicase proteins and double-stranded RNA (16, 28, 53) , but it is not yet entirely clear if both are the sites of active RNA synthesis. Hydrophobic transmembrane domains are present in nsp3, nsp4, and nsp6 and likely serve to anchor the nascent pp1a/pp1ab polyproteins to membranes during the first steps of RTC formation (1, 6, 16, 21, 26, (32) (33) (34) 54) . A variety of studies suggest that most, if not all, coronavirus nsp's are recruited to the viral RTCs (16, 21, 35, 45) , and a complex and dynamic pattern of interactions between intermediate and mature RTC proteins is thought to play a role in the regulation of viral RNA synthesis. Crystallographic analysis of individual and oligomeric complexes of coronavirus nsp's, as well as studies involving Saccharomyces cerevisiae two-hybrid, coimmunoprecipitation, cosedimentation, and cross-linking analysis (3, 47, 48, 55, 56) , provides insights into some of the structural aspects of these RTC interactions.
Many of the coronavirus nsp's have been shown, or are predicted, to have enzymatic functions, including papain-like cysteine proteinases (nsp3), ADP-ribose 1Љ-phosphatase (nsp3), 3C-like cysteine proteinase (nsp5), RNA-dependent RNA polymerase primase (RdRP-primase) (nsp8), RdRp (nsp12), 5Ј-to-3Ј helicase (nsp13), 3Ј-to-5Ј exonuclease (nsp14), N7-methyltransferase (nsp14), endoribonuclease (nsp15), and S-adenosylmethioninedependent 2Ј-O-methyltransferase (nsp16) (5, 22, 39, 44, 49) . Clearly, some of these activities are common to many RNA viruses and are directly related to the biogenesis of the RTC and viral RNA synthesis. However, others (e.g., the endoribo-nuclease of nsp15) are unique to coronaviruses or viruses closely related to them (23) and may be involved in unusual activities that are related to the size of the coronavirus genome or virus-host interactions (15) . Also, the finding that 2Ј-Oribose-methylated RNA substrates are resistant to cleavage by the severe acute respiratory syndrome coronavirus (SARS-CoV) endoribonuclease indicates that there may be functional links between different nsp's: for example, the endonuclease activity of nsp15 and the S-adenosylmethionine-dependent 2Ј-O-methyltransferase activity of nsp16 (23) .
The nsp3 protein is the largest and, possibly, most complex of the proteins encoded in the murine hepatitis virus (MHV) replicase gene. It is comprised of 2,005 amino acids (222 kDa) and is thought to contain as many as 15 domains that can be defined by structure, function, and phylogeny (31) . These domains include amino-terminal ubiquitin-related (UB1) and hypervariable acidic (AC) domains, a papain-like cysteine proteinase domain (PLP1), an X domain with poly(ADP-ribose) binding activity (X or ADRP domain), a second ubiquitinrelated domain (UB2), a second papain-like cysteine proteinase domain (PLP2), group 2 specific nucleic acid binding (NAB) and marker (G2M) domains, a transmembrane domain (TMD) that includes at least 2 membrane-spanning helices, a putative metal-binding domain (ZF), and a carboxyl-terminal Y domain that contains three subdomains (Y1, Y2, and Y3) with characteristic patterns of conserved Cys/His residues. The nsp3 protein is excised from its precursors, pp1a and pp1ab, by the concerted activity of the PLP1 and PLP2 domains, with PLP1 being responsible for the amino-terminal cleavage (cleavage site 2 [CS2]) and PLP2 being responsible for the carboxyl-terminal cleavage (cleavage site 3 [CS3]) (2, 12, 26, 59) .
The genetic analysis of functions associated with the coronavirus RTC has employed both classical and reverse approaches. Reverse genetics has, for example, been used to introduce mutations at the active site of the coronavirus nsp14 exonuclease domain, which results in a failure to rescue recombinant virus (30) or the rescue of mutant viruses with significant growth and RNA synthesis defects (11) . Similarly, mutant MHVs that are unable to liberate nsp1 from the nascent polyprotein (i.e., nsp1/nsp2 cleavage mutants) and mutant MHVs that lack extensive regions of the nsp1 or, indeed, the entire nsp2 coding region could be rescued but exhibited decreased or delayed replication (18) . In contrast to these attenuated phenotypes, mutation of the active site of the Human coronavirus strain 229E (HCoV-229E) nsp3 ADRP domain has no significant effect on virus RNA synthesis or virus titer (36) .
The analysis of classical temperature-sensitive (ts) mutants is also a powerful tool for investigating the complexities of coronavirus RNA synthesis. We have recently reported a genetic and functional analysis of a panel of MHV ts mutants that are unable to synthesize viral RNA when the infection is initiated and maintained at the nonpermissive temperature, i.e., mutants with an RNA-negative phenotype. One of the main conclusions of this analysis is that mutations in the nsp12, nsp14, and nsp16 proteins define distinct cistrons (cistrons II, IV, and VI) while mutations in the nsp4, nsp5, and nsp10 proteins define a single cistron (cistron I). On the basis of these results, we have predicted that most of the ORF1a gene products (more specifically, nsp4 to nsp10) function as a polyprotein before cleavage into individual polypeptides, or they are as-sembled into the RTC and are then cleaved, with a gain of function expressed in individual polypeptides. In contrast, the ORF1b-encoded nsp's (nsp12 to nsp16) are diffusible and assemble and function in viral RNA synthesis after cleavage from pp1ab. We have also suggested that replicase polyprotein processing may have an important role in regulating the different functions associated with the coronavirus RTC: for example, minus-and plus-strand RNA synthesis and the aging of the active complex (40) .
The model that we have presented is consistent with our understanding of the organization and expression of the coronavirus replicase gene. However, there are still many unanswered questions. For example, it has not been shown that, as we predict, the nsp6, nsp7, nsp8, and nsp9 proteins function in cis, together with nsp4, nsp5, and nsp10. To do this, it will be necessary to find MHV RNA-negative ts mutants with causal mutations in the relevant proteins and to complement them with existing mutants. Similarly, our model leaves open the question of whether or not other ORF1a-encoded proteins will be able to complement defects in cistron I mutants. As mentioned above, it is known that particular domains of nsp1 and nsp3 are not essential for virus replication, but it is, of course, still possible that these proteins do have functions in RNA synthesis. Finally, the classical genetic approach can be further exploited to provide mechanistic insights into the functional inactivation of nsp's at the nonpermissive temperature. For example, a recent biochemical analysis of the MHV RNAnegative mutant LA ts6 has suggested that nsp10 acts as a regulatory cofactor of nsp5 proteinase activity (9) . It would be interesting to investigate the polyprotein processing pattern of additional mutants in order to establish whether similar interactions exist between other proteins encoded in the MHV replicase gene locus.
Cells and viruses. 17Cl-1 (17 clone 1) mouse fibroblast cells (46) and HeLa-D98OR (27) cells were cultured at 37°C in Dulbecco's modified Eagle's medium (DMEM) supplemented with 5% fetal calf serum (FCS), 100 U/ml penicillin, 100 g/ml streptomycin, and 5% tryptose phosphate broth (TPB). Monkey kidney (CV-1) cells and baby hamster kidney (BHK-21) cells were obtained from the European Collection of Cell Cultures (ECACC) and cultured in minimal essential medium (MEM) supplemented with HEPES (25 mM), 5% FCS, and antibiotics. MHV strain A59 (MHV-A59) was originally obtained from the laboratory of L. Sturman, Wadsworth Center for Laboratories and Research, Albany, NY. The characterized ts mutant viruses used in this study have been described previously (40) and were derived from the original mutant isolates after plaque purification and propagation in 17Cl-1 cells cultured at 33°C in low-pH MEM (pH 6.6 to 6.8) containing 5% FCS, 100 U/ml penicillin, 100 g/ml streptomycin, and 5% TPB (38) . Revertant viruses were picked from plaques of mutants whose titers were determined at 39.5°C and were plaque purified three times at 39.5°C. Virus stocks were obtained by using virus from a single plaque (ϳ10 7 PFU) to infect ϳ4 ϫ 10 6 cells to yield 6 ml of stock virus, which was then used to infect ϳ1 ϫ 10 7 cells at 33°C for 16 h to yield passage 2 virus stocks with a titer of ϳ5 ϫ 10 8 PFU/ml. Vaccinia virus (WR strain) and vaccinia virus recombinants were propagated, titrated, and purified as described previously (50) .
Isolation of Bristol ts mutants. 17Cl-1 cells were infected with MHV-A59 at a multiplicity of infection (MOI) of 5 PFU/cell in Hanks' balanced salt solution (HBSS) containing 50 g/ml DEAE-dextran and 0.2% bovine serum albumin (BSA). After 30 min at 33°C, the inoculum was removed and the cells were incubated in DMEM containing 10% FCS, 100 U/ml penicillin, 100 g/ml streptomycin, and 150 g/ml of 5-fluorouracil at 33°C for 16 h. This concentration of pyrimidine analogue was determined to inhibit virus replication by 80%. The mutagenized virus stock (ϳ2 ϫ 10 6 PFU/ml) was stored at minus 80°C. The mutagenized virus was diluted to 1.5 PFU/ml, and 200-l aliquots were incubated with ϳ10 4 17Cl- Characterization of ts mutant stocks for titer and efficiency of plating. 17Cl-1 cells in six-well plates were infected in duplicate at room temperature with 0.5 ml of 10-fold dilutions of virus in HBSS containing 50 g/ml DEAE-dextran and 0.2% BSA. The inoculum was removed after 30 min, and the cells were washed with 2 ml of DMEM. Monolayers were overlaid with MEM containing 5% FCS, 100 U/ml of penicillin, 100 g/ml streptomycin, and 0.1% Gelrite gellan gum (Sigma-Aldrich, Poole, Dorset, United Kingdom) and incubated at the appropriate temperature with 7.5% CO 2 . Infected cells were incubated at 33°C for 3 days or 37°C/39.5°C for 2 days. Cells were fixed with 5% formaldehyde in phosphate-buffered saline (PBS) and stained with a solution of 0.2% toluidine blue, 0.2% azure blue, and 1% boric acid. The efficiency of plating (EOP) was determined by dividing the titer at 39.5°C by the titer at 33°C. Viral RNA synthesis. Viral RNA synthesis was measured by [ 3 H]uridine incorporation into acid-precipitable material in the presence of 20 g/ml actinomycin D. [5-3 H]uridine (Ͼ1.0 TBq/mmol; Amersham Radiochemicals, Chalfont, United Kingdom) was added to the medium at 1.85 MBq/ml or 7.4 MBq/ml. After incubation, the radioactive medium was removed and the cells were lysed with 5% lithium dodecyl sulfate and 200 g/ml proteinase K in LEH buffer (0.1 M LiCl, 0.001 M EDTA, 0.01 M HEPES [pH 6.6]) at 2 ϫ 10 5 to 5 ϫ 10 5 cells per ml. DNA was sheared by repeated passage of the lysate through a 27-gauge needle attached to a 1-ml tuberculin syringe. Duplicate or triplicate samples of 5 ϫ 10 4 cells were precipitated with trichloroacetic acid, the precipitates were collected on glass fiber filters (Fisher Scientific, Leicestershire, United Kingdom) and dried under a heat lamp, and the radioactivity was determined by liquid scintillation spectroscopy.
Northern blotting. RNA for Northern blotting was obtained by infecting ϳ10 7 17Cl-1 cells with virus at an MOI of 10, incubating the cells for 8 h at 33°C or 6 h at 39.5°C, and isolating total RNA using the Trizol reagent (Invitrogen, Paisley, United Kingdom) as described by the manufacturer. The poly(A)-containing RNA was isolated using oligo(dT) 25 Dynabeads (Dynal, Oslo, Norway) as previously described (52) . The RNA was then incubated with formamide (50%) and formaldehyde (2.2 M) at 70°C for 10 min and electrophoresed in a 1% agarose gel containing 20 mM MOPS (3-N-morpholinopropanesulfonic acid) and 600 mM formaldehyde. After electrophoresis, the gel was soaked in 0.05 N NaOH, neutralized, and equilibrated with 20ϫ SSC (3 M NaCl, 0.3 M sodium citrate, 1 mM EDTA) before being vacuum blotted onto a nylon membrane (Optitran BA-S 83; Schleicher and Schuell, Sigma-Aldrich, Poole, United Kingdom). The RNA was cross-linked to the membrane using UV light, and MHV RNAs were detected by hybridization with a 466-bp, ␣-32 P-random-prime-labeled PCR product corresponding to sequences in the nucleocapsid protein ORF of the MHV-A59 genome (10) .
Complementation analysis. Complementation analysis was done by infecting 17Cl-1 cells in 35-mm dishes either singly with one ts mutant or doubly with two ts mutants to give a total MOI of 20 PFU/cell. After incubation at room temperature for 30 min, the inoculum was removed and the monolayers were washed three times with HBSS. The cells were then incubated with low-pH MEM containing 5% FCS, 100 U/ml penicillin, 100 g/ml streptomycin, and 5% TPB prewarmed to 39.5°C. Infected cells were incubated at 39.5°C for 8 h. Supernatants were harvested and clarified by centrifugation at 10,000 rpm for 5 min. The virus titer was determined by plaque assay at 33°C. The complementation indices (CI) were calculated as described previously (40) , and a CI of Ͼ2 between mutant pairs was consistent with complementation, i.e., Ϯ4-fold difference above background, while a CI of Ͻ2 was negative for complementation.
RT-PCR and sequencing. Viral RNA for reverse transcription-PCR (RT-PCR) and sequencing was obtained by infecting ϳ10 7 17Cl-1 cells with virus at an MOI of 10, incubating the cells for 8 h at 33°C, and isolating total RNA using the Trizol reagent as described by the manufacturer. The replicase gene coding region (ORF1a and ORF1b) of MHV-Brts31 and MHV-Br31R1 virus (nucleotides [nt] 211 to 21751) was amplified and sequenced using a set of 121 oligonucleotides (P1 to P121) that are complementary to sequences spaced at approximately 350-nucleotide intervals along the positive-and negative-strand copies of the viral RNA (sequences available on request). A part of the nsp3 protein coding region of MHV-Brtsc31 and MHV-Br31cR1 (nt 3704 to 4517) was amplified and sequenced using six oligonucleotides of the oligonucleotide set. RT-PCR of viral RNA and sequencing were done using standard protocols. Sequencing analysis was done by MWG Eurofins (Ebersberg, Germany). Computer-assisted analysis of sequence data was done using the Lasergene biocomputing software (DNAStar).
Recombinant MHV-inf-1 and MHV-Brtsc31 were derived from vaccinia virus vMHV-inf-1, which contains a cloned, full-length MHV-A59 cDNA (GenBank accession number AY700211). Mutagenesis was done using the reverse genetics system described previously (7) . Briefly, two rounds of vaccinia virus-mediated homologous recombination were done using the Escherichia coli guanine-phosphoribosyltransferase (GPT) gene as a selection marker. First, part of the nsp3 protein coding region within the vMHV-inf-1 cDNA was replaced by the GPT gene using homologous recombination with plasmid pGPT-nsp3(N). pGPT-nsp3(N) encodes the GPT gene flanked on its left by MHV-A59 nt 3751 to 4161 and on its right by MHV-A59 nt 5044 to 5460. Second, the GPT gene within the recombinant vaccinia virus vMHV-nsp3GPT cDNA was replaced by a mutated nsp3 protein coding region using homologous recombination with plasmid pnsp3-M475I (MHV-A59 nt 4129 to 4131; ATG3ATA). The plasmid pnsp3-M475I was produced by overlap PCR using mutagenic primers (details are available from the authors upon request) and vMHV-inf-1 DNA as template. The resulting PCR product, which encompasses MHV-A59 nt 3751 to 5460, was then cloned into pCR-Blunt II-TOPO (Invitrogen) to produce pnsp3-M475I. The identities of plasmids and recombinant vaccinia viruses were confirmed by sequence analysis of the mutated regions. Further cloning details, plasmid maps, and sequences are available from the authors on request.
Recombinant coronaviruses, MHV-inf-1 and MHV-Brtsc31, were rescued from cloned cDNA using purified, EagI-cleaved vaccinia virus DNA as a template for the transcription of recombinant, full-length MHV genomic RNA, which was electroporated into BHK-MHV-N cells as described previously (7). Following electroporation, the transfected BHK-MHV-N cells were mixed with a 4-fold excess of 17Cl-1 cells and cultured at 33°C. At days 1 and 2 postelectroporation, tissue culture supernatants were taken and recombinant coronaviruses were plaque purified three times. Virus stocks were obtained by using virus from a single plaque to infect 17Cl-1 cells to yield passage 1 virus stocks with a titer greater than 1 ϫ 10 8 PFU/ml. The identities of recombinant MHV-A59 and recombinant mutant viruses were confirmed by sequence analysis of the mutated regions.
Viral protein synthesis and immunoprecipitation of MHV replicase products. 17Cl-1 cells (ϳ10 6 cells) in 60-mm-diameter cell culture dishes were either mock infected or infected with viruses at an MOI of 20.0 and incubated at 33°C in serum-free medium. After 1 h, the medium was replaced with DMEM supplemented with 5% FCS and containing 5 g/ml of actinomycin D. At 4.0 h postinfection, the medium was replaced with medium lacking methionine and cysteine and supplemented with 2% dialyzed fetal calf serum. At 4.5 h postinfection, 35 S-trans label (100 Ci/ml) was added and one dish was transferred to 39.5°C. At 6.5 h postinfection, cells were washed with PBS and then lysed in 250 l of lysis buffer A (4% SDS, 3% dithiothreitol [DTT], 40% glycerol, and 0.065 M Tris-HCl, pH 6.8). Cell lysates were immunoprecipitated as described previously (42) . Briefly, radiolabeled cell lysates (1 ϫ 10 5 cell equivalents) were diluted in 1 ml RIPA buffer (0.5% Triton X-100, 0.1% SDS, 300 mM NaCl, 4 mM EDTA, and 50 mM Tris-HCl, pH 7.4) and immunoprecipitated with 2 l of nsp-specific antibodies and protein A Sepharose beads (GE Healthcare). Protein-bead conjugates were washed four times in RIPA buffer, and the proteins were eluted from beads by incubation with 2ϫ sample buffer (4% SDS, 20% glycerol, 10% 2-mercaptoethanol, 0.004% bromphenol blue, 0.125 M Tris HCl, pH 6.8) at 37°C for 30 min. Protein products were separated by SDS-PAGE in 5 to 12.5% gradient polyacrylamide gels and were analyzed by autoradiography. The 14 C molecular mass marker (GE Healthcare) was used as a molecular mass standard.
TEM analysis. 17Cl-1 cells were infected with virus at an MOI of 20.0 and incubated at 33°C. At 3.5 h postinfection, one set of infected cells was shifted to 39.5°C. At 5.5 h postinfection, the cells were washed two times with PBS, scraped from the dish, and pelleted in a microcentrifuge tube at 1,000 ϫ g for 5 min at room temperature. PBS was replaced with 0.1 M cacodylate-buffered 4% glutaraldehyde before processing for transmission electron microscopy (TEM) analysis as previously described (16) . Briefly, cells fixed in glutaraldehyde were rinsed two times for 10 min each in 0.1 M cacodylate buffer and postfixed in 0.1 M cacodylate-buffered 1% osmium tetroxide for 1 h. After two rinses in buffer, the cells were serially dehydrated in increasing concentrations of ethanol. After the dehydration step, the ethanol was replaced with 100% propylene oxide (transition fluid) by 3 changes of 10 min each. The cells were then immersed in a 1:1 solution of resin-propylene oxide and left on a rotator overnight at room temperature. Next day, the solution was replaced with a 3:1 solution of resinpropylene oxide for 7 to 8 h, after which the solution was changed to 100% resin and left on a rotator overnight at room temperature. The samples were then embedded in a freshly prepared 100% Embed 812 resin (Electron Microscopy Sciences) for 7 to 8 h. The molds were then placed in a 56°C oven overnight.
Sections 0.5 m thick were stained with 1% toluidine blue, and selected areas were thin sectioned (80 nm), mounted on copper grids, and stained with 5% uranyl acetate and Reynolds' lead citrate (37) . The grids were examined and photographed on a Hitachi H600 at 75 kV. Negatives were scanned into digital files using a Microtek i800 scanner.
Isolation and phenotype of MHV-Brts31. MHV-Brts31 was isolated as described in Materials and Methods and identified as a putative RNA-negative, ts mutant due to its inability to cause cytopathic effects in 17Cl-1 cells that were infected and maintained at the nonpermissive temperature. To analyze the phenotype of MHV-Brts31 in more detail, we determined first the EOP of a high-titer (passage 2) virus stock. At 33°C, the stock had a titer of 1 ϫ 10 8 PFU/ml, and at 39.5°C, the stock had a titer of 1.5 ϫ 10 3 PFU/ml, which is an EOP of 1.5 ϫ 10 Ϫ5 . This value is indicative of a single point mutation. Of the plaques that formed at the nonpermissive temperature, all that we tested were no longer ts and are, therefore, revertants. One of these revertants was designated MHV-Br31R1. The plaque size and morphology of MHV-Brts31 and MHV-Br31R1 at 33°C and of MHV-Br31R1 at 39.5°C were identical to those of the parental MHV-A59 (Fig. 1A, left panel) . MHV-Brts31 also failed to form plaques at 37°C.
Next, we next asked whether or not MHV-Brts31 is an RNAnegative mutant. First, we determined the amounts of viral RNA synthesized in cells infected with MHV-A59, MHV-Brts31, or MHV-Br31R1 and maintained at the permissive and nonpermissive temperatures of 33°C and 39.5°C, respectively. Figure 1B shows that at 33°C, all three viruses produce genome-sized and subgenome-sized virus RNA in the expected ratios, although the Northern blot suggests that MHV-Brts31 may synthesize slightly less viral RNA than does MHV-A59 or MHV-Br31R at the permissive temperature. At the nonpermissive temperature of 39.5°C, MHV-Brts31 did not synthesize a detectable level of RNA. In contrast, MHV-Br31R1 synthesizes amounts of virus RNA that are comparable to those of parental MHV-A59. These results confirm that MHV-Brts31 is an RNA-negative mutant.
In order to look more closely at the RNA synthesis phenotype of MHV-Brts31 and MHV-Br31R1, we next analyzed the kinetics of viral RNA synthesis in cells infected with MHV-A59, MHV-Brts31, or MHV-Br31R1 and maintained at the permissive and nonpermissive temperatures. Figure 2A higher temperature. We have also confirmed that the kinetics and levels of virus RNA synthesis in MHV-Brts31-infected cells maintained at the nonpermissive temperature cannot be distinguished from those of mock-infected cells and that cells infected with MHV-Br31R1 and MHV-A59 are indistinguishable in terms of virus RNA synthesis at the permissive temperature (data not shown). These results show that MHV-Brts31 has near-normal levels of total RNA synthesis at the permissive temperature. They also suggest that MHV-Br31R1 is most likely to be a true revertant. To show definitively whether or not the kinetics and levels of viral RNA synthesis in MHV-Brts31-infected cells at the permissive temperature are identical to those of MHV-A59-infected cells will require a more detailed analysis, possibly using different multiplicities of infection and a more accurate measure of RNA levels, e.g., quantitative RT-PCR (qRT-PCR). A major advantage of using ts mutants is that they can be analyzed by temperature shift protocols, i.e., by allowing them to gain function at the permissive temperature, shifting them to the nonpermissive temperature, and then determining if the function is lost. Thus, we determined the effect of temperature shift on the levels of total viral RNA synthesis in MHV-Brts31and MHV-Br31R1-infected 17Cl-1 cells. To do this, infections were initiated at 33°C and infected cells were incubated until RNA synthesis reached about 20% of the maximum rate, which is approximately 4 to 5 h postinfection. At this time, one set of cells were pulse-labeled with [ 3 H]uridine in the presence of actinomycin D. Another set of virus-infected cells were shifted to 39.5°C and pulse-labeled for 30 min at 0 and 30 min after shifting to the nonpermissive temperature. The cells were pulse-labeled with [ 3 H]uridine in the presence of actinomycin D and in the presence or absence of 100 g/ml of cycloheximide. It should be noted that at 5 h postinfection the virus RTC produces mainly (Ͼ90%) plus-strand RNA (38) .
The results are shown in Fig. 2B . The pulse-labeling prior to temperature shift shows again that MHV-Brts31-and MHV-BR31R1-infected cells have comparable levels of RNA synthesis. After temperature shift, total RNA synthesis increased in MHV-Br31R1-infected cells in the absence of cycloheximide. This reflects the amplification of virus RTCs and the increased metabolic rate at higher temperatures. In the presence of cycloheximide, the activity fails to increase, but after shift, significant activity remains. We conclude that the MHV-Br31R1 replicase-transcriptase activity formed before temperature shift is relatively resistant to higher temperature. In MHV-Brts31-infected cells, there is also significant RNA synthesis activity after temperature shift, irrespective of the presence or absence of cycloheximide. We interpret this to mean that for MHV-Brts31, preexisting complexes are also relatively resistant and continue to synthesize plus-strand RNA at the nonpermissive temperature. To decide whether or not RTCs in MHV-Brts31-infected cells are able to synthesize minus-strand RNA at the nonpermissive temperature will require further experiments.
Complementation analysis. Previous work by Sawicki et al. (40) has divided a large panel of RNA-negative, ts mutants of MHV into four complementation groups. We crossed MHV-Brts31 with at least one virus from each of these known complementation groups using a classical complementation assay. The results are shown in Table 1 . Basically, MHV-Brts31 was able to complement all of the mutant viruses tested from each complementation group, with complementation indices (CI) of between 28 and 638. This contrasts with a CI of 1.8 obtained for a cross involving mutants in the same complementation group (MHV-Albts6, CG1, versus MHV-Albts16, CG1) and a CI of 240 for a cross involving mutants from different complementation groups (MHV-Albts16, CG1, versus MHV-Albts22, CG2). These results indicate that MHV-Brts31 forms the first member of a new complementation group and defines a new MHV replicase gene cistron, which we wish to provisionally designate cistron 0.
Identification of the mutation responsible for the ts phenotype of MHV-Brts31. Thiel et al. have shown that MHV replicase gene products suffice for subgenome-length mRNA synthesis (51) . We reasoned, therefore, that MHV-Brts31 would have a mutation somewhere in the replicase gene, and to identify this mutation, we sequenced the entire replicase genes of both MHV-Brts31 and MHV-Br31R1 (data not shown; sequence available on request). This comparative analysis identified a single coding mutation, G to A at nucleotide 4131 (codon 1307 in ORF1a, amino acid 1307 in pp1a), which resulted in a conservative replacement of methionine-475 with isoleucine in nsp3. The methionine residue at position 475 in the MHV nsp3 is conserved among group 2a coronaviruses (e.g., MHV, bovine coronavirus [BCoV], and human coronavirus OC43) but is not conserved in other coronaviruses. Both MHV-A59 and the revertant MHV-Br31R1 have a methionine at this position, showing that MHV-Br31R1 is a true revertant. The numbering system used was that assigned to our infectious clone of the MHV-A59 genome (GenBank accession number AY700211).
In order to confirm that G 4131 to A is the mutation responsible for the ts phenotype of MHV-Brts31, we used a vaccinia virus-based reverse genetics system to produce a recombinant virus, MHV-Brtsc31, that has a single G-to-A nucleotide exchange at position 4131 compared to the parental recombinant MHV-A59, which we call MHV-inf-1. MHV-Brtsc31 was rescued and plaque purified three times at 33°C, and a passage 2 virus stock was obtained. Sequence analysis of RNA from this stock of virus confirmed the presence of the G 4131 -to-A mutation (data not shown). At 33°C, the MHV-Brtsc31 stock had a titer of 6 ϫ 10 8 PFU/ml, and at 39.5°C, the stock had a titer of 1.0 ϫ 10 4 PFU/ml, which is an EOP of 1.7 ϫ 10 Ϫ5 . MHV-Brtsc31 also failed to form plaques at 37°C (Fig. 1A, right panel) . One of the plaques that formed in cells infected with MHV-Brtsc31 and maintained at the nonpermissive temperature of 39.5°C was picked and designated MHV-Br31cR1. The plaque size and morphology of MHV-Brtsc31 and MHV-Br31cR1 at 33°C and those of MHV-Br31cR1 at 39.5°C were identical to those of the parental MHV-inf-1 (Fig. 1A, right panel) . Sequence analysis of RNA isolated from 17Cl-1 cells infected with a passage 2 stock of MHV-Br31cR1 showed that it was, indeed, a true revertant (data not shown). Next, we determined the amounts of viral RNA synthesized in cells infected with MHV-inf-1 and MHV-Brtsc31 and maintained at the permissive and nonpermissive temperatures of 33°C and 39.5°C, respectively. Figure 1C shows that at 33°C both viruses produce genome-sized and subgenome-sized virus RNA in the expected ratios. At the nonpermissive temperature of 39.5°C, MHV-Brtsc31 did not synthesize a detectable level of RNA. Finally, we repeated the same complementation analysis described above using MHV-Brtsc31 (Table 1) . Again, the ts mutant virus was able to complement all of the mutant viruses tested from each complementation group, with complementation indices (CI) of between 27 and 717. Taken together, these results confirm that a single G 4131 -to-A mutation is responsible for the ts phenotype of MHV-Brts31, conclusively locate cistron 0 in ORF1a, and show that nsp3 has, at least, one essential role in MHV RNA synthesis.
To determine if proteolytic processing of the replicase polyprotein(s) is affected in MHV-Brtsc31-and MHV-Br31cR1-infected cells at the nonpermissive temperature, we did temperature shift experiments with metabolic labeling and immunoprecipitation using nspspecific antibodies (Fig. 3) . As described in Materials and Methods, 17Cl-1 cells were infected with either MHV-Brtsc31 or MHV-Br31cR1 at 33°C and incubated for 4 h. At this time, one set of virus-infected cells was shifted to 39.5°C and a duplicate set was left at 33°C. All the virus-infected cells were then radiolabeled with 35 S-trans label from 4.5 to 6.5 h postinfection. At the end of the radiolabeling, whole-cell lysates were prepared, the viral nsp's were immunoprecipitated with nspspecific antisera, and the products were analyzed by SDS-PAGE.
Our first experiment (Fig. 4) showed that, in MHV-Brtsc31infected cells incubated at the nonpermissive temperature, compared to the permissive temperature, there is a major disruption of replicase polyprotein processing with respect to the processing of the pp1a p150 intermediate to its products, nsp4, nsp5 and nsp8 (compare boxed areas in Fig. 4A , lanes 3 to 5, with those in lanes 8 to 10). This disruption of p150 processing was not seen in cells infected with MHV-Br31cR1 (Fig. 4B, lanes 3 to 5 and lanes 8 to 10) . In contrast, there was no obvious impairment of the processing of nsp1, nsp2, and nsp3 in the MHV-Brtsc31-infected cells at the nonpermissive temperature (Fig. 4A, lanes 1 and 2 and lanes 6 and 7) . Also, there was no temperature-sensitive effect on nsp1, nsp2, and nsp3 processing in MHV-Br31cR1-infected cells at either permissive or nonpermissive temperatures (Fig. 4B, lanes 1 and 2 and lanes 6 and 7) . These results indicate that, at the nonpermissive temperature, the replacement of methionine-475 with isoleucine in nsp3 of MHV-Brtsc31 is affecting nsp5-mediated processing of pp1a and, more specifically, the processing of p150 to generate nsp4, nsp5, and nsp8. These results were unexpected and the first demonstration of a relationship be- tween nsp3 function and pp1a processing by the 3CLpro cysteine protease activity of nsp5.
In addition to mediating the proteolytic processing of the pp1a polypeptide, nsp5 also mediates the processing of the ORF1b-encoded region of pp1ab, i.e., the production of nsp12 to nsp16. To see if the replacement of methionine-475 with isoleucine in nsp3 of MHV-Brtsc31 has any effect on pp1ab processing, we repeated the experiment described above using an antiserum specific for nsp12, the viral RdRp. The results shown in Fig. 5 lead us to conclude that the processing of nsp12 is also impaired at the nonpermissive temperature compared to the permissive temperature in cells infected with MHV-Brtsc31 but not in MHV-Br31cR1-infected cells (Fig. 5 , lanes 2 and 4 and lanes 6 and 8). As a control, we once again demonstrated the impaired processing of nsp5 in MHV-Brtsc31-infected cells at the nonpermissive temperature (Fig. 5, lanes 1 and 3 and lanes 5 and 7) . TEM analysis of MHV-infected cells reveals that DMVs can be visualized as dark-ringed vesicles in the cytoplasm adjacent to the nucleus (16) . In cells infected with MHV-Br31R1, the typical accumulation of DMV structures (indicated by arrows) was evident after incubation at the permissive (Fig. 6A) and nonpermissive (Fig. 6B ) temperatures, with an increased number of DMVs in the cells incubated at 39.5°C. In contrast, we found that although the number of DMVs in MHV-Brts31infected cells incubated at the permissive temperature (Fig. 6C ) was similar to the number found in revertant virus-infected cells, the number of DMVs in MHV-Brts31-infected cells that had been shifted to the nonpermissive temperature was reduced ( Fig. 6D and F) . We also noted a small number of aberrant vesicles at the nonpermissive temperature (indicated by asterisks in Fig. 6D and F) that stained with uranyl acetate and Reynolds' lead citrate but do not have the typical doublemembrane morphology. Further work will be necessary to determine if these are possibly residual DMVs.
Taken together, these results indicate that the replacement of methionine-475 with isoleucine in nsp3 of MHV-Brts31 impairs both 3CLpro-mediated processing of replicase polyproteins and the assembly or stability of DMVs at the nonpermissive temperature.
Previously, we have identified four complementation groups of MHV RNA-negative ts mutants. Three of these groups, groups II, IV, and VI, were defined by ts viruses with mutations in the ORF1b-encoded proteins nsp12, nsp14, and nsp16, respectively, while the fourth group, group I, was defined by ts viruses with mutations in three of the ORF1a-encoded proteins, nsp4, nsp5, and nsp10. This led us to the hypothesis that each of the five MHV ORF1b cleavage products (nsp12 to nsp16) may represent distinct cistrons but that the majority of the ORF1a cleavage products will function as a single cistron. More specifically, it was proposed that cistron I would encompass the regions of ORF1a that encode nsp4 to nsp10.
The complementation analysis of MHV-Brts31 described here identifies a new cistron (cistron 0) in the MHV replicase gene. Furthermore, the identification of the mutation responsible for the ts phenotype of MHV-Brts31 (G 4131 to A) shows that cistron 0 encompasses, at least, the region encoding nsp3. For a number of reasons, we suggest that cistron 0 will not extend beyond the coding region of nsp3. First, as mentioned above, extensive deletion of sequences encoding the carboxyl region of nsp1 or, indeed, the entire coding region of nsp2 has an attenuating effect but is not lethal for MHV replication (13, 18) . Second, although it has been shown that an RNA stemloop in the bovine coronavirus (BCoV) 5Ј proximal coding region of nsp1 is essential for RNA replication (4) (which would explain the lethality of deleting the entire nsp1 coding region), the majority of evidence suggests that the coronavirus nsp1 protein primarily has a role in the virus-host interaction (8, 24, 25, 29) or regulatory, rather than essential, functions in RNA synthesis (19) . Although the possibility that other ORF1a-or ORF1b-encoded nsp's (i.e., nsp6, nsp7, nsp8, nsp9, nsp11, nsp13, or nsp15) could fall into the same complementation group as MHV-Brts31 cannot be ruled out, it would, in our opinion, be difficult to reconcile this with our current view of MHV replicase gene expression and function.
Our analysis of replicase polyprotein processing and DMV structures in MHV-Brtsc31-infected cells at the nonpermissive temperature allows us to reach two important conclusions. First, the ts lesion of MHV-Brtsc31 is affecting nsp5-mediated processing of pp1a and pp1ab, specifically, the processing of p150 to generate nsp4, nsp5, and nsp8 and the processing of pp1ab to generate nsp12. However, there is no effect on the processing of the replicase polyproteins to produce nsp1, nsp2, and nsp3. We interpret this to mean one of two things. Either there is an interaction between nsp3 and another component of the RTC, which is necessary to facilitate nsp5-mediated polyprotein processing, or the normal structure or function of nsp3 is needed to provide pp1a/pp1ab substrates upon which nsp5 can act. In this respect, the precedent for protein-protein interactions within the coronavirus RTC that result in a modification of nsp5 activity has been given by Donaldson et al. (9) , who have suggested that nsp10 may act as a cofactor for 3CLpro-mediated processing.
Second, the decrease in the number of DMV structures in MHV-Brts31-infected cells at the nonpermissive temperature indicates that the assembly or stability of the RTC is impaired. A quantitative analysis of DMV numbers in cells infected with MHV-Brts31, together with experiments to determine the turnover rate of DMV structures in MHV-A59-infected cells, will be needed to determine the precise defect in DMV biogenesis. However, our data suggest that preformed RTCs are able to continue plus-strand RNA synthesis at the nonpermissive temperature, and it seems more likely that the failure to correctly process the replicase polyproteins would affect assembly rather than stability of the RTC. On the other hand, an earlier analysis of cells infected with the RNA-negative, ts mutant MHV-Albts6 (6) has shown that DMV formation and replicase polyprotein processing are not always linked. In this case, DMV formation was severely impaired even though replicase polyprotein processing appeared to be normal. The finding that both MHV-Brts31 and MHV-Albts6 fail to accumulate DMVs at the nonpermissive temperature is consistent with the idea that DMVs either are required for coronavirus RNA synthesis or are generated as a result of viral RNA synthesis.
In the light of these conclusions, the obvious challenge is to identify the specific function or functions of nsp3 that are impaired at the nonpermissive temperature in MHV-Brts31/ MHV-Brtsc31-infected cells and to relate this to the phenotype of the mutant virus. In this context, it is important to note that the data do not allow us to discern whether the phenotypic changes that we observe are directly or indirectly related to the causal mutation. The M475I mutation, which is located, essentially, at the junction of the PLP1 and X domains of nsp3, could lead to multiple effects that may then be separately related to the different phenotypic manifestations. Indeed, Graham and Denison (17) have shown that recombinant MHV mutants with changes in the nsp1-to-nsp3 protein coding region may have a variety of different phenotypes with respect to replicase polyprotein processing, replication, and RNA synthesis.
In general, we can offer three possible ways in which the M475I mutation may exert its effect. First, it is possible that one or more of the enzymatic activities associated with nsp3 are rendered inactive at the nonpermissive temperature. For a number of reasons, we consider this the least likely explanation. For example, we consider it unlikely that inactivation of PLP1 activity is responsible for the phenotype of MHV-Brts31 (or MHV-Brtsc31). Our data do not provide any evidence for a defect in nsp1, nsp2, and nsp3 processing, and previous studies have shown that MHV PLP1 activity is not essential for virus replication in cell culture (17) . Nevertheless, mutants of this sort are highly impaired on recovery and we cannot rule out that the inactivation of PLP1 may somehow be involved. Similarly, although it has been shown that the HCoV-229E PLP2 activity is essential for replication (58), our results do not indicate any defect in this activity at the nonpermissive temperature in MHV-Brtsc31-infected cells. A second type of function associated with nsp3 is the ADP-ribose 1Љ-phosphatase and poly(ADP-ribose) binding activities of the X domain. Again, we consider it unlikely that inactivation of one or both of these activities can account for the phenotype of MHV-Brts31 because it has been shown previously that mutation of the active site of the HCoV-229E nsp3 X domain has no significant effect on virus RNA synthesis (36) . The inactivation of nsp3-associated deubiquitination activity (57) and other, as-yet-unidentified enzymatic activities remains a possibility.
A second and perhaps more likely explanation is that, at the nonpermissive temperature, interactions between nsp3 and cellular membranes are compromised. Although there is still some uncertainty, the current model of MHV nsp3 topology predicts at least 2 transmembrane helices (26, 31, 32) . This would place the bulk of nsp3 on the same membrane face occupied by nsp5 and the nsp12 to nsp16 proteins processed from pp1ab. Kanjanahaluethai et al. (26) recently showed that removing the nsp3 transmembrane domain abolished PLP2 activity, presumably by preventing the interaction of PLP2 with its substrate. If the MHV-Brts31/MHV-Brtsc31 nsp3 protein is no longer stably inserted into the cellular membrane at the nonpermissive temperature, then this could compromise the integrity of the whole replicase-transcriptase complex. The same might be true if the replacement of methionine-475 with isoleucine in nsp3 had a global effect upon the structure of nsp3, or even the pp1a and pp1ab polyproteins as a whole. Our current view of nsp3 as a large protein with a functional and structural domain architecture might argue against a global effect (31) , and the position of this substitution, which is essentially predicted to be in a flexible region separating conserved functional domains, would be more consistent with the idea that intramolecular nsp3 domain interactions are affected at the nonpermissive temperature.
The third possibility is that, at the nonpermissive temperature, nsp3 protein-protein, or perhaps nsp3 protein-RNA, interactions within the RTC are compromised. This could be manifested as an inability to assemble new complexes or as the assembly of a nonfunctional complex. Putative metal-binding domains are located in the PLP, ZF, and Y domains of the MHV nsp3, and they may represent zinc-finger motifs that are involved in the recognition of other protein components of the RTC. The MHV nsp3 protein also contains a putative nucleic acid-binding domain. Neuman et al. (31) have shown that the corresponding SARS-coronavirus NAB domain of nsp3 has both single-stranded nucleic acid-binding activity and doublestranded unwinding activity, and they suggest that these activities are consistent with a nucleic acid chaperone function. It is easy to see how the disruption of MHV nsp3 protein-protein or nsp3 protein-RNA interactions could prevent the assembly of a functional RTC and result in the ts phenotype that we observe for MHV-Brts31 and MHV-Brtsc31.
Work is under way to investigate some of these possibilities, and we are confident that RNA-negative ts mutants such as MHV-Brts31 will prove to be valuable tools for unraveling the complexities of coronavirus RNA synthesis.
|
Annnotations
- Denotations: 1
- Blocks: 0
- Relations: 0